Intermec SF51 SF51 Cordless Scanner User's Guide - Page 47
Using Configuration Commands
View all Intermec SF51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 4 - Configuration Command Reference Using Configuration Commands A configuration command changes the way the SF51 operates. For example, you can change the Beep Volume and make the SF51 beeper very quiet for a quiet environment. You can configure the SF51: • by sending commands to your SF51 from your PC using EasySet. For help, see "To configure the SF51 by sending commands from EasySet" on page 19. • by sending commands to a bar code setup sheet. Then, scan the bar codes onscreen with your SF51, or print the setup sheet and scan the bar codes. You do not need a Bluetooth connection to use this method. For help, see "To configure the SF51 by scanning bar codes" on page 19. • from your Intermec computer. Send commands to your SF51 from your Intermec computer using Intermec Settings. For help, see the procedure "To configure the SF51 from your Intermec computer" on page 20. For a list of all the commands and their default values as they are organized in EasySet, see the next section, "Configuration Commands By Function." For descriptions of each command organized alphabetically, see "SF51 Configuration Commands" on page 38. 34 SF51 Cordless Scanner User's Guide