Intermec SF51 SF51 Cordless Scanner User's Guide - Page 35
Configuring the Discoverable State of the SF51
View all Intermec SF51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 - Connecting and Configuring the SF51 To configure a Bluetooth PIN for your SF51 1 Start EasySet version 5.4 or later. 2 Select the SF51, and click OK. 3 In the Commands window, select Data transmission settings > Bluetooth parameters > security. 4 Select active. 5 Select compose PIN and create a Bluetooth PIN that is up to 16 characters in length. The default Bluetooth PIN is 0000. 6 Scan both commands onscreen with your SF51, or print the bar code setup sheet and scan both commands. Note: For security reasons, you can only change the Bluetooth PIN by scanning a bar code. Configuring the Discoverable State of the SF51 By default, the SF51 is always discoverable. For enhanced security, you should configure your SF51 for limited discoverability, which allows the SF51 to be discoverable by Bluetooth management applications for only 30 seconds. For more information, see "Bluetooth Discoverable" on page 39. To configure your SF51 for limited discoverability • Scan this bar code: Bluetooth parameters - discoverable - limited \60\02\50\41\00\02\40 The SF51 is discoverable for 30 seconds. 22 SF51 Cordless Scanner User's Guide