Intermec SF51 SF51 Cordless Scanner User's Guide - Page 52
Beep Volume, Bluetooth Connect/Disconnect, Bluetooth Device Name, Bluetooth Device Bluetooth
View all Intermec SF51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 4 - Configuration Command Reference Beep Volume Adjusts the volume of the beeps. You can set Beep Volume to Low, Medium, or High. Note: To turn off the beeper, you set the Beep Duration to 0. Turning off the beeper does not affect the beeps associated with Bluetooth Connect/Disconnect or Bluetooth Device Page. Use Beep Volume in combination with Beep Frequency and Good Read Beep Duration to define beeps according to operator preference and work environment. Bluetooth Connect/Disconnect Connects or disconnects Bluetooth communications between the SF51 and host computer if you are using Serial Port Profile (SPP). To connect to a host computer, enter the Bluetooth address of the computer and scan the bar code with the SF51. To disconnect, scan the disconnect bar code. Bluetooth Device Name Sets the name of the scanner. If the scanner is in a discoverable state, its Bluetooth device name is available to host computers during device discovery. Bluetooth Device Page If your SF51 is within Bluetooth communication range of your host PC, you can send this command from EasySet to locate the SF51. For help, see "Paging the SF51" on page 30. Bluetooth Discoverable Determines the discoverable state of the SF51. When the SF51 is discoverable, it is visible to other Bluetooth devices in communication range. SF51 Cordless Scanner User's Guide 39