JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 21
Setup [SetUp]
View all JVC DLA-RS45U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4.5 Setup [SetUp] Used to change the initial setting. Command code HEX 0x53 0x55 ASCII 'S' 'U' Table 4-9 SETUP CMD Function Initial setting [SetUp] Parameters Data length: No regulation Sub command table (Mandatory command only) Table 4-10 SETUP CMD SUB HEX ASCII Function Last Memory 4 Command control Model X70/XC788/RS55/ X90/XC988/RS65 RS4800 X30/XC388/RS45 Reference Operation 0x52 0x53 'R' 'S' Switch the external control command protocol No - 0x52 0x43 'R' 'C' Switch the IR code No 0x52 0x4C 'R' 'L' Switch RS-232C/LAN Yes It consists of "Sub command" + "Setting". The Sub command consists of ASCII character two bytes. Sub commands parameters are as follow. Parameters when the Sub command is [0x52,0x53] : Data length 1 HEX 0x31 ASCII '1' Operation Compatible command system Parameters when the Sub command is [0x52,0x43] : Data length 1 HEX 0x30 0x31 ASCII '0' '1' A code(0x73) B code(0x63) Operation Parameters when the Sub command is [0x52,0x4C] : Data length 1 HEX 0x30 0x31 ASCII '0' '1' RS-232C LAN Operation 21 / 80 PJ03220107B