JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 66

4 Command control 4.14.1 Operation Use the command as shown in the following examples. (Example1) DHCP Client setting Purpose: To set DHCP Client to On. (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x21 0x89 '!'(Operation) PJ 0x01 Individual : 1 0x4C 'L' 0x53 'S' 0x44 'D' 0x53 'S' 0x31 On 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ←Projector 0x06 0x89 0x01 0x4C 0x53 0x0A ACK PJ Individual : 1 'L' 'S' End (3) The projector set DHCP Client to On. (Example2) IP Address setting Purpose: To set IP Address to 192.168.1.10. (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x21 0x89 '!'(Operation) PJ 0x01 Individual : 1 0x4C 0x53 0x49 0x50 0x43 0x30 0x41 0x38 0x30 0x31 0x30 0x41 'L' 'S' 'I' 'P' 192(=0xC0) 168(=0xA8) 1(=0x01) 10(=0x0A) 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ←Projector 0x06 0x89 0x01 0x4C 0x53 0x0A ACK PJ Individual : 1 'L' 'S' End (3) The projector saves "192.168.1.10." to IP Address. (Valid after network reboot) (Example3) Network reboot To reboot Network (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x21 0x89 0x01 0x4C 0x53 '!'(Operation) PJ Individual : 1 'L' 'S' 0x52 'R' 0x53 'S' 0x31 Execute 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ←Projector 0x06 0x89 0x01 0x4C 0x53 0x0A ACK PJ Individual : 1 'L' 'S' End (3) The projector reboots the Network. 66 / 80 PJ03220107B