JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 24
Operation, Reference
View all JVC DLA-RS45U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4 Command control 4.6.1 Operation Use the command as shown in the following examples. Purpose: To switch the gamma table to Custom1. (Current setting: Normal) (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x21 0x89 '!'(Operation) PJ 0x01 Individual : 1 0x47 'G' 0x54 'T' 0x34 Custom1 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ←Projector 0x06 0x89 0x01 0x47 0x54 0x0A ACK PJ Individual : 1 'G' 'T' End (3) The projector switches the gamma table to Custom1. 4.6.2 Reference Use the command as shown in the following examples. Purpose: To confirm the current gamma table of the projector. (Current setting: Normal) (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x3F 0x89 '?'(Reference) PJ 0x01 Individual : 1 0x47 'G' 0x54 'T' 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ← Projector 0x06 0x89 0x01 0x47 0x54 0x0A ACK PJ Individual : 1 'G' 'T' End (3) The projector transmits a report of gamma table to the external controller. 3: ← Projector 0x40 0x89 0x01 0x47 0x54 '@'(Response) PJ Individual : 1 'G' 'T' 0x30 Normal 0x0A End By the above exchange, it can be confirmed that the projector's gamma table is set to Normal. 24 / 80 PJ03220107B