JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 65
LAN setup [Lan Setup]
View all JVC DLA-RS45U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4 Command control 4.14 LAN setup [Lan Setup] Used to setup LAN configuration. Command code HEX 0x4C 0x53 ASCII 'L' 'S' Table 4-88 LAN SETUP CMD Function LAN setup [Lan Setup] Parameter1 Data length: No regulation Sub command table (Mandatory command only) Table 4-89 LAN SETUP CMD SUB HEX 0x44 0x53 0x49 0x50 0x53 0x4D 0x44 0x47 0x4D 0x52 0x50 0x41 0x53 0x54 ASCII 'D' 'S' 'I' 'P' 'S' 'M' 'D' 'G' 'M' 'A' 'R' 'S' 'P' 'T' Function DHCP Client setting IP Address setting Subnet Mask setting Default Gateway setting MAC Address setting Network reboot Port setting Last memory Yes Yes Yes Yes Yes No Yes Operation (When 'DHCP Client' is Off.) (When 'DHCP Client' is Off.) (When 'DHCP Client' is Off.) - It consists of "Sub command" + "setting". Sub command consists of ASCII character 2 bytes. Reference - Parameter2 Sub command parameters are as follows. Parameters when Sub command is [0x44,0x53]: Data length 1 HEX 0x30 0x31 ASCII '0' '1' Table 4-90 DHCP Client Operation Off(Static) On Parameters when Sub command is [0x49,0x50] [0x53,0x4D] [0x44,0x47]: Data length 8 Parameters when Sub command is [0x4D,0x41]: Data length 12 Parameters when Sub command is [0x52,0x53]: Data length 1 HEX 0x31 ASCII '1' Table 4-91 NETWORK RESTART Operation Network Restart Parameters when Sub command is [0x50,0x54]: Data length 4 65 / 80 PJ03220107B