JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 52

4 Command control Special2 Data This is the same as Gamma data [GammaRed, Green, Blue] of Gamma table "Custom 1/2/3". Special3 Data This is the same as Model Status Asking [MoDel]. Special4 Data For copying isf adjustment data, a table by terminal and picture mode is specified. Table 4-81 COPY CMD DATA FOR ISF HEX 0x30 0x30 0x30 0x31 0x30 0x32 0x30 0x35 0x31 0x30 0x31 0x31 0x31 0x32 0x31 0x35 ASCII '0' '0' '0' '1' '0' '2' '0' '5' '1' '0' '1' '1' '1' '2' '1' '5' Operation isf-DAY_HDMI1 isf-DAY_HDMI2 isf-DAY_Comp isf-DAY_PC(*1) isf-NIGHT_HDMI1 isf-NIGHT_HDMI2 isf-NIGHT_Comp isf-NIGHT_PC(*1) (*1) Not used on RS4800 models. Special5 Data All isf-Day/NIGHT data except Gamma. 37(Adjust Item 1) ｘ2(Picture Mode)ｘ4(Terminal)＋138(Color Temp. /Col. Management) ＋78 (Reserved) = 512 byte Adjust Item 1 Color Profile(1)(*1) Tone White(2)(*1) Tone Red(2) (*1) Tone Green(2) (*1) Tone Blue(2) (*1) Contrast(2) Brightness(2) Color(2) Tint(2) Sharpness(2) Detail Enhance(2) RNR(2) MNR(2) BNR(1) Bright Level(2)(*1) Dark Level(2)(*1) Color Space(1)(*2) Clear Motion Drive(1) Lens Aperture(2) Lamp Power(1) MPC Level (2) Picture Mode isf-DAY isf-NIGHT Terminal HDMI1 HDMI2 Comp. PC(*1) Adjust Item 2（Color Temp. /Color Management） Color Temp. Correction(1) x Picture Mode(2) = 2 Gain(R/G/B) (3x2)x Picture Mode(2) = 12 Offset(R/G/B) (3x2)x Picture Mode(2) = 12 Adjust Area(R/G/B/C/M/Y/O) (7x2)x Picture Mode(2) = 28(*1) Hue(R/G/B/C/M/Y/O) (7x2)x Picture Mode(2) = 28(*1) Sat(R/G/B/C/M/Y/O) (7x2)x Picture Mode(2) = 28(*1) Bright(R/G/B/C/M/Y/O) (7x2)x Picture Mode(2) = 28(*1) These data are aligned by little endian. (*1) Not used on RS4800 models although described here to keep memory map matching. (*2) Not used on X70/XC788/RS55, X90/XC988/RS65 models although described here to keep memory map Matching. 52 / 80 PJ03220107B