JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 75
Purpose: To reset the lamp time., Purpose: To transmit the data saved in the external controller
View all JVC DLA-RS45U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
4 Command control (Example3) Lamp time reset Purpose: To reset the lamp time. (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x21 0x89 0x01 0x53 0x53 '!'(Operation) PJ Individual : 1 'S' 'S' 0x4C 'L' 0x54 'T' 0x31 Reset 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ←Projector 0x06 0x89 0x01 0x53 0x53 0x0A ACK PJ Individual : 1 'S' 'S' End (3) The projector reset the lamp time to 0 hour 00 minute. (Example4) Adjustment data transmission Purpose: To transmit the data saved in the external controller (except Gamma) to the projector. (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x21 0x89 0x01 0x53 0x53 '!'(Operation) PJ Individual : 1 'S' 'S' 0x4C 'L' 0x44 'D' 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ←Projector 0x06 0x89 0x01 0x53 0x53 0x0A ACK PJ Individual : 1 'S' 'S' End (3) The external controller transmits 256 bytes binary data to the projector. 3: External controller → 256 byte Data parameter (4) If the projector receives the data (3) above and the command receipt is normal, an ACK is returned from the projector as follows. 4: ←Projector 0x06 0x89 0x01 0x53 0x53 0x0A ACK PJ Individual : 1 'S' 'S' End (5) The projector sets the picture setting data on the projector. 75 / 80 PJ03220107B