JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 61
Purpose: To Confirm Current Picture Mode Picture Mode: isf-DAY, Purpose: To confirm the brightness.
View all JVC DLA-RS45U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
4 Command control 4.13.2 Reference Use the command as shown in the following examples. (Example1) Confirm Picture Mode Purpose: To Confirm Current Picture Mode (Picture Mode: isf-DAY) (1) Transmit the data from the external controller to the projector as follows. 1: External Controller → 0x3F 0x89 0x01 0x50 0x4D '?'(Reference) PJ Individual : 1 'P' 'M' 0x50 'P' 0x4D 'M' 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ← Projector 0x06 0x89 0x01 0x50 0x4D 0x0A ACK PJ Individual : 1 'P' 'M' End (3) Then, the projector transmits Picture Mode to the External Controller. 3: ← Projector 0x40 0x89 0x01 0x50 0x4D '@'(Reference) PJ Individual: 1 'P' 'M' 0x30 0x37 isf-Day 0x0A End By the above exchange, it can be confirmed that the projector's Picture Mode is isf-DAY. (Example 2) Brightness confirmation Purpose: To confirm the brightness. (Current brightness: -3) (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x3F 0x89 '?'(Reference) PJ 0x01 Individual : 1 0x50 'P' 0x4D 'M' 0x42 'B' 0x52 'R' 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ← Projector 0x06 0x89 0x01 0x50 0x4D 0x0A ACK PJ Individual : 1 'P' 'M' End (3) The projector transmits brightness setting "-3" to the external controller. 3: ← Projector 0x40 0x89 0x01 0x50 0x4D '@'(Response) PJ Individual : 1 'P' 'M' 0x46 'F' 0x46 'F' 0x46 'F' 0x44 'D' 0x0A End By the above exchange, it can be confirmed that the projector's brightness is set to "-3". 61 / 80 PJ03220107B