JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 35
Purpose: To confirm the model status of the current projector.
View all JVC DLA-RS45U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
4 Command control 4.12.1 Reference Use the command as shown in the following examples. Purpose: To confirm the model status of the current projector. (1) Transmit the data from the external controller to the projector as follows. 1: External controller → 0x3F 0x89 '?'(Reference) PJ 0x01 Individual : 1 0x4D 'M' 0x44 'D' 0x0A End (2) If the projector receives the data (1) above and the command receipt is normal, an ACK is returned from the projector as follows. 2: ← Projector 0x06 0x89 0x01 0x4D 0x44 0x0A ACK PJ Individual : 1 'M' 'D' End (3) The projector transmits a report of the model status to the external controller. 3: ← Projector 0x40 0x89 0x01 0x4D 0x44 '@'(Response) PJ Individual : 1 'M' 'D' Parameters 14 bytes Model status 0x0A End By the above exchange, it can be confirmed model status of the projector. 35 / 80 PJ03220107B