JVC DLA-RS45U Command Communication Specification for D-ILA Projectors (v1.7 f - Page 25
Gamma Bank switch [Gamma-bankSwitch]
View all JVC DLA-RS45U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
4 Command control 4.7 Gamma Bank switch [Gamma-bankSwitch] Gamma bank is to set Gamma coefficient and Gamma data of the gamma table of "Custom1", "Custom2", and "Custom3". Used for switching operation of the gamma bank and referring the gamma bank. Command code HEX 0x47 0x53 Table 4-13 GAMMA BANK SWITCH CMD ASCII 'G' 'S' Function Gamma bank switch [Gamma-bankSwitch] Operation Reference Parameters Data length: 1 【Data 0】 HEX 0x30 0x31 0x32 0x33 0x34 0x35 0x36 ASCII '0' '1' '2' '3' '4' '5' '6' Table 4-14 GAMMA BANK SWITCH CMD DATA Operation N/A N/A N/A N/A Custom1 Custom2 Custom3 When the projector is not powered on and it receives the command, the projector ignores the command and does not respond. Gamma table is not switched even if the Gamma bank is switched. Available Gamma tables for switching/referencing Gamma bank are Custom1, Custom2 and Custom3 only. When the gamma table is other than these and it receives the command, the projector ignores the command and does not respond. 25 / 80 PJ03220107B