JVC GR-DV3000U Instructions - Page 10
Grip Adjustment, Viewfinder Adjustment, Shoulder Strap Attachment, Tripod Mounting - thumb
UPC - 046838160585
View all JVC GR-DV3000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 EN Power Zoom Lever Recording Start/Stop button Lock Button Power Switch GETTING STARTED (cont.) Grip Adjustment 1 Separate the Velcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. Be sure to fasten the Velcro strip to your preference. Diopter Adjustment Control Viewfinder Adjustment 1 Set the Power Switch to " " or " " while pressing down the Lock Button located on the switch. 2 Pull out the viewfinder fully and adjust it manually for best viewability. 3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused. PAUSE 13 2 Shoulder Strap Attachment 1 Following the illustration, thread the strap through the eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure to attach the other end of the strap to the other eyelet 3 located under the Grip Strap . Confirm the strap is not twisted. Tripod Mounting CAUTION When attaching the camcorder to a tripod, extend its legs to stabilize the camcorder. It is not advised to use small sized tripods. This may cause damage to the unit by falling over. 1 To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise. Some tripods are not equipped with studs.