JVC GR-DV3000U Instructions - Page 31

EN 31 SYSTEM DISPLAY TITLE W/ NAVIGATION SOUND IN E- CLIP REC CAM RESET CANCEL EXECUTE ON LCD SCREEN LCD/TV DATE/ TIME OFF AUTO TIME CODE ON OFF ON CLOCK ADJ. QUALITY IMAGE SIZE REC SELECT / Refer to "Title Impose" (੬ pg. 48). Refer to "NAVIGATION Function" (੬ pg. 42). Refer to "Audio Dubbing Using Digital Sound Effects" (੬ pg. 73). Refer to "E-Mail Clip Recording" (੬ pg. 46). Does not reset all settings to the factory-preset. Resets all settings to the factory-preset. Keeps the camcorder's display (except the date, time and time code) from appearing on the connected TV screen. Makes the camcorder's display appear on screen when the camcorder is connected to a TV. The date/time does not appear. Displays the date/time for approx. 5 seconds in the following cases: • When the Power Switch is set from "OFF" to " " or " ". • When tape playback starts. The camcorder displays the date/time when scenes are recorded. • When the date is changed during tape playback. The date/time is always displayed. Time code is not displayed. Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. Allows you to set the current date and time (੬ pg. 11). Refer to "Picture Quality/Image Size Setting" (੬ pg. 16). When Snapshot recording is performed with the VIDEO/MEMORY Switch set to "VIDEO", still images are recorded only onto the tape. When Snapshot recording is performed with the VIDEO/MEMORY Switch set to "VIDEO", still images are recorded not only onto the tape but also on the memory card (640 X 480 pixels). In this mode, the "SNAP MODE" selection in the CAMERA Menu is also applicable to memory card recording. DSC : Factory-preset NOTES: ● " SYSTEM" and " DISPLAY" functions which are set when the Power Switch is set to " " are also applied when the Power Switch is set to " " (੬ pg. 32). "CLOCK ADJ." only appears when the Power Switch is set to " ". ● Settings made in the " DISPLAY" Menu remain effective even when the Power Switch is set to " ". However, the menu settings can be changed only when the Power Switch is set to " ". ● The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided) (੬ pg. 55, 58, 67).