JVC GR-DV3000U Instructions - Page 36
Fade/Wipe Effects
UPC - 046838160585
View all JVC GR-DV3000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
36 EN IMPORTANT Some Fade/Wipe Effects cannot be used with certain modes of Program AE with special effects (੬ pg. 38, 39). If an unusable Fade/Wipe Effect is selected, its indicator blinks or goes out. Power Switch Recording Start/ Stop Button VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.) MENU Wheel FADE/WIPE Button To Deactivate The Selected Effect press FADE/WIPE again in step 6 so that the effect indicator disappears. ADVANCED FEATURES (cont.) Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Fade or Wipe works when tape recording is started or when you stop recording. 1 Set the VIDEO/MEMORY Switch to "VIDEO" and set the Power Switch to " " while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully. 2 Press the MENU wheel in. The Menu Screen appears. 3 Rotate the MENU wheel to select " FADER/ WIPE", then press it. Rotate the MENU wheel to select the desired function, then press it. Selection is complete. 4 Press the MENU wheel in again. The Menu Screen closes. 5 To activate the Fade-in or Wipe-in . . . ..... Press FADE/WIPE during Record-Standby mode so that the selected effect indicator appears. To activate the Fade-out or Wipe-out Press FADE/WIPE during recording so that the selected effect indicator appears. 6 Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out. NOTES: ● You can extend the length of a Fade or Wipe by pressing and holding the Recording Start/Stop Button. ● The sound at the end of the last recorded scene is not stored.