JVC GR-DV3000U Instructions - Page 57
Using The Camcorder As A WebCam
UPC - 046838160585
View all JVC GR-DV3000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.) Power Switch To USB USB cable (provided) To USB connector USB-equipped PC EN 57 Using The Camcorder As A WebCam This camcorder can be used as a WebCam via USB connection. 1 Make sure all necessary software (provided) are installed in your PC and all units are turned off. 2 Connect the camcorder to your PC using the USB cable. 3 Set the VIDEO/MEMORY Switch to "MEMORY" and set the Power Switch to " " or " ", then turn on the PC. • "Web CAMERA" appears on the screen. • If the PC is not powered on, the camcorder does not enter the Web Camera mode. 4 When finished, turn off the PC first, then the camcorder. Disconnect the USB cable from the camcorder and PC. NOTES: ● In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder. ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (੬ pg. 9). ● Use the provided software PIXELA ImageMixer to capture video in real-time. ● You can also use the camcorder for webconference by using Windows® Microsoft Netmeeting and signing up for Microsoft Hotmail. ● In the Web Camera mode, the following buttons cannot be operated: TITLE, E-MAIL, SNAPSHOT, the Recording Start/Stop button. Refer to the instruction manuals of the PC and provided Software. Display PC We b CAMERA