JVC GR-DV3000U Instructions - Page 78

78 EN TROUBLESHOOTING (cont.) SYMPTOM Q During recording, sound cannot be heard. POSSIBLE CAUSES • The optional headphones are not connected to the headphone connector. • The sound volume of the headphone connector was not adjusted appropriately. The sound volume at this point is the same as the level it was adjusted to during playback. CORRECTIVE ACTION • Connect the optional headphones to the headphone connector (੬ pg. 82, 83). • Adjust the sound volume during playback (੬ pg. 25). W Play, Rewind and Fast- • The Power Switch is set to " " or • Set the Power Switch to " " Forward functions do not " ". (੬ pg. 25). work. E A memory card cannot be • The Power Switch is set to " " or • Set the Power Switch to " " played back. " ". (੬ pg. 26). • The VIDEO/MEMORY Switch is set • Set the VIDEO/MEMORY to "VIDEO". Switch to "MEMORY". R The tape is moving, but there is no picture. • Your TV has AV input terminals, but is not set to its VIDEO mode. • The cassette holder cover is open. • Set the TV to the mode or channel appropriate for tape playback (੬ pg. 54, 55). • Close the cassette holder cover (੬ pg. 12). T The LCD monitor image is distorted. • During playback of the unrecorded portion, High-speed Search and still playback, LCD monitor indications appear distorted. This is not a defect. ---- Y Images on the LCD monitor • The speaker volume is too great. are jittery. • Turn the speaker volume down (੬ pg. 25). U There is no playback picture • Since the analog input mode is on the connected TV. engaged, the camcorder is in the Record-Standby mode. • Set "S/AV INPUT" to "OFF" in the Menu Screen (੬ pg. 32). I Blocks of noise appear during playback, or there is no playback picture and the screen becomes blue. ---- • Clean the video heads with an optional cleaning cassette (੬ pg. 90). O The LCD monitor, the viewfinder and the lens have become dirty (ex. fingerprints). ---- • Wipe them gently with soft cloth. Wiping strongly can cause damage (੬ pg. 80).