JVC GR-DV3000U Instructions - Page 55
set DATE/TIME to AUTO, ON or OFF
UPC - 046838160585
View all JVC GR-DV3000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
1 Make sure all units are turned off. 2 Connect the camcorder to a TV or VCR as shown in the illustration (੬ pg. 54). If using a VCR . . . go to step 3. If not . . . go to step 4. 3 Connect the VCR output to the TV input, referring to your VCR's instruction manual. 4 Turn on the camcorder, the VCR and the TV. 5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode. To choose whether or not the following displays appear on the connected TV . . . • Date/Time ..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the Menu Screen (੬ pg. 32). Or, press DISPLAY on the remote control to turn on/off the date indication. • Time Code ..... set "TIME CODE" to "ON" or "OFF" in the Menu Screen (੬ pg. 32). • Playback Sound Mode, Tape Speed And Tape Running Displays for tape playback ..... set "ON SCREEN" to "LCD" or "LCD/TV" in the Menu Screen (੬ pg. 32). EN 55 NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (੬ pg. 9). ● To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder's Power Switch to " " or " ", then set your TV to the appropriate input mode. ● Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on. ● If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture. ● If no image is displayed or no sound is heard from the TV, set "S/AV INPUT" to "OFF" in the Menu Screen (੬ pg. 32). ● When a cable is connected to the AV or PHONE connector, the sound is not heard from the speaker.