JVC GR-DV3000U Instructions - Page 51
Making A New Folder, Initializing A Memory Card
UPC - 046838160585
View all JVC GR-DV3000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Folder and File names Each time shooting takes place, a file name is made using a number which is larger by one than the largest number of the file names which are in use. Even if you delete an IMAGE file with a number in the middle of range, the number will not be used for a new shot; a gap will remain in the numerical sequence. If the file name reaches DVC09999, a new folder (such as "101JVCGR") will be made and the file name will start again from DVC00001. VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.) MENU Wheel F SELECT Button PLAY OF Power Switch Lock Button Display FORMAT ERASE ALL EX I ST I NG DATA? EXECUTE RETURN Menu Screen EN 51 Making A New Folder New still pictures you are going to take can be separated from previously shot pictures by resetting the file name to DVC00001; these new pictures will be stored in a new folder. 1 Set the VIDEO/MEMORY Switch to "MEMORY", then set the Power Switch to " " while pressing down the Lock Button located on the switch. • A stored file is displayed. 2 Make sure an IMAGE file is displayed (੬ pg. 26); if not, press SELECT to access the MEMORY SELECT Screen. Rotate the MENU wheel to select "IMAGE", then press it. 3 Press the MENU wheel in. The Menu Screen appears. Rotate the MENU wheel to select "NO. RESET", then press it. The NO. RESET Screen appears. 4 Rotate the MENU wheel to select "EXECUTE", then press it. The new folder (such as "101JVCGR") will be made and the file name of the next shot starts from DVC00001. Initializing A Memory Card You can initialize a memory card anytime. After initializing, all images and data stored on the memory card, including those which have been protected, are cleared. 1 Perform step 1 of "Making A New Folder" above. 2 Press the MENU wheel in. The Menu Screen appears. Rotate the MENU wheel to select "FORMAT" and press it. The FORMAT Screen appears. 3 Rotate the MENU wheel to select "EXECUTE" and press it. The memory card is initialized. When initialization is finished, "NO IMAGES STORED" appears. • To cancel initialization, rotate the MENU wheel to select "RETURN" and press it. CAUTION Do not perform any other operation (such as turning off the camcorder) during initialization. Also, be sure to use the provided AC Power Adapter/Charger, as the memory card may be corrupted if the battery becomes exhausted during initialization. If the memory card becomes corrupted initialize it.