JVC GR-DV3000U Instructions - Page 64
Slow-Motion Playback, Frame-By-Frame Playback, Playback Zoom
UPC - 046838160585
View all JVC GR-DV3000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
64 EN Zoom Buttons SHIFT Left or SLOW Rewind Button Right or SLOW Forward Button Normal playback Press T USING THE REMOTE CONTROL UNIT (cont.) Remote sensor Up Button Down Button PLAY PAUSE STOP To move image, press (Right) while keeping SHIFT held down. FEATURE: Slow-Motion Playback PURPOSE: To allow slow-speed search in either direction during tape playback. OPERATION: 1) To change from normal to Slow-Motion Playback, press SLOW (9 or 0) more than approx. 2 seconds. After approx. 5 minutes (approx. 20 seconds with an 80-minute cassette) in Slow Rewind or approx. 5 minutes in Slow Forward, normal playback resumes. Ⅲ To stop Slow-Motion Playback, press PLAY (4). NOTES: ● You can also engage Slow-Motion Playback from Still Playback by pressing SLOW more than approx. 2 seconds. ● During Slow-Motion Playback, due to digital image processing, the picture may take on a mosaic effect. ● After SLOW (9 or 0) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction. ● There may be a small margin between the slowmotion playback start point you chose and the actual start point for Slow-Motion Playback. ● During Slow-Motion Playback, there will be disturbances in video and the picture may seem unstable, especially with steady images. This is not a malfunction. ● During Slow-Motion Playback, press PAUSE (6) to pause playback. FEATURE: Frame-By-Frame Playback PURPOSE: To allow frame-by-frame search during tape playback. OPERATION: 1) To change from normal to Frame-By-Frame Playback, press SLOW (0) repeatedly for forward or SLOW (9) repeatedly for reverse. Each time it is pressed, the frame is played back. NOTE: You can also engage Frame-By-Frame Playback from Still Playback by pressing SLOW (9 or 0) repeatedly. FEATURE: Playback Zoom PURPOSE: To magnify the recorded image up to 30X at any time during playback. OPERATION: 1) Press PLAY (4) to find the scene of interest. 2) Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T zooms in. 3) You can move the image on screen around to find a particular portion of the picture. While holding down SHIFT, press (Left), (Right), (Up) and (Down). Ⅲ To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press PLAY (4). NOTES: ● Zoom can also be used during slow-motion and still playback. ● Due to digital image processing, the quality of the image may suffer.