JVC GR-DV3000U Instructions - Page 61
Dubbing Still Images Recorded On A Tape, To A Memory Card
UPC - 046838160585
View all JVC GR-DV3000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
SNAPSHOT Button Power Switch Lock Button COPY - OF F I MAGE NAV I GAT I ON Play/Pause Button (4/6) MENU Wheel VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.) Display SP 6 EN 61 Dubbing Still Images Recorded On A Tape To A Memory Card Still images can be dubbed from a tape to a memory card. 1 Load a memory card (੬ pg. 13) and cassette (੬ pg. 12). 2 Set the VIDEO/MEMORY Switch to "VIDEO", then set the Power Switch to " " while pressing down the Lock Button. 3 Press the MENU wheel in. The Menu Screen appears. Rotate it to select " VIDEO" and press it. The VIDEO Menu appears. 4 Rotate the MENU wheel to select " COPY" and press it. The Sub Menu appears. Rotate it to select "IMAGE" and press it. Selection is complete. 5 Rotate the MENU wheel to select " RETURN" and press it twice. The normal playback screen reappears. 6 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback. 7 To start dubbing, press SNAPSHOT. The selected image is stored on the memory card. • " " blinks during dubbing. NOTES: ● If SNAPSHOT is pressed in step 7 when a memory card is not loaded, the message "COPYING FAILED" is displayed. ● If an image recorded on the tape using the WIDE mode (੬ pg. 30) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it. ● To use Playback Special Effects with a video image you wish to dub, perform up to step 7 using the remote control (provided) (੬ pg. 65). ● Images are dubbed in 640 x 480 pixels.