Kenwood TK-862HG Operation Manual - Page 22

Transmitting

Get Kenwood TK-862HG PDF manuals and user guides View all Kenwood TK-862HG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

TRANSMITTING Note: You can also transmit using a TK-762G/ TK-862G transceiver. 1 Press and hold the PTT switch. 2 Enter the code of the transceiver you want to call or enter a Group code on the keypad. • Be sure to enter the ID or Group code, followed by the Intermediate code of the transceiver you want to call. If desired, you can also enter a message code of up to 5 digits. • If desired, you can send codes the same way you make DTMF calls {page 12}. Both manual methods can be used or you can store codes in memory, then dial them from a memory location. • TK-760G/ TK-860G only: "CALL" appears on the display and the LED indicator lights red. 3 Use the transceiver the same as in a regular call; press the PTT switch to transmit and release it to receive. • When you release the PTT switch, squelch turns OFF and the LED indicator flashes orange (depending on dealer programming). When you receive a signal, the LED indicator alternates between green and orange. When the signal drops out, the LED indicator flashes orange again. If no signal is received for a pre-determined time, squelch turns back ON. • Pressing the key programmed as Monitor at any time will turn the squelch back ON. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
16
TRANSMITTING
Note:
You can also transmit using a TK-762G/ TK-862G transceiver.
1
Press and hold the
PTT
switch.
2
Enter the code of the transceiver you want to call or enter a Group code on
the keypad.
•
Be sure to enter the ID or Group code, followed by the Intermediate code of the
transceiver you want to call.
If desired, you can also enter a message code of up to 5
digits.
•
If desired, you can send codes the same way you make DTMF calls {page 12}.
Both
manual methods can be used or you can store codes in memory, then dial them from a
memory location.
•
TK-760G/ TK-860G only:
“CALL” appears on the display and the LED indicator lights
red.
3
Use the transceiver the same as in a regular call; press the
PTT
switch to
transmit and release it to receive.
•
When you release the
PTT
switch, squelch turns OFF and the LED indicator flashes
orange (depending on dealer programming).
When you receive a signal, the LED
indicator alternates between green and orange.
When the signal drops out, the LED
indicator flashes orange again.
If no signal is received for a pre-determined time,
squelch turns back ON.
•
Pressing the key programmed as
Monitor
at any time will turn the squelch back ON.