Kodak I840 User Guide - Page 28

Changing the SCSI termination, integrator or Kodak Field Representative.

Get Kodak I840 - Scanner Firmware - PC PDF manuals and user guides
UPC - 041778263082
View all Kodak I840 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

3. Use the down arrow to select Change SCSI ID. 4. Select Return. Changing the SCSI termination 5. Use the up and down arrows to select the desired SCSI ID number. 6. Select Return. 7. Turn the scanner off. Wait at least 10 seconds and turn the scanner back on again. 8. After the scanner has completed the self-test, reboot the host PC. This setting allows you to change the SCSI termination. Values are 0 (disabled) or 1 (enabled). By default, the SCSI termination is enabled and remains enabled until you disable it and reboot the scanner. The SCSI termination should not be changed unless directed to do so by your integrator or Kodak Field Representative. To change the SCSI termination: 1. Select the Diagnostics Settings menu icon. 2. Use the right or left arrow to navigate to the Settings function. 3. Use the down arrow to select Change SCSI Termination. A-61169 July 2003 3-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
A-61169 July 2003
3-11
3.
Use the down arrow to select
Change SCSI ID.
4. Select
Return
.
5.
Use the up and down arrows to select the desired SCSI ID number.
6. Select
Return
.
7.
Turn the scanner off. Wait at least 10 seconds and turn the scanner
back on again.
8.
After the scanner has completed the self-test, reboot the host PC.
Changing the SCSI
termination
This setting allows you to change the SCSI termination. Values are 0
(disabled) or 1 (enabled). By default, the SCSI termination is enabled and
remains enabled until you disable it and reboot the scanner. The SCSI
termination should not be changed unless directed to do so by your
integrator or Kodak Field Representative.
To change the SCSI termination:
1. Select the Diagnostics Settings menu
icon.
2.
Use the right or left arrow to navigate to the Settings function.
3.
Use the down arrow to select
Change SCSI Termination
.