Kodak I840 User Guide - Page 58
Separation roller and tires, Replacing the separation roller, roller
UPC - 041778263082
View all Kodak I840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Separation roller and tires This section provides procedures for changing the separation roller and tires. Replacing the separation To replace the separation roller: roller 1. Open the swing out door. 2. Lift the roller cover. 3. Pull the separation pad holder forward and remove the separation roller. To install the new separation roller: 4. Pull the separation pad holder forward and put the new separation roller in place. NOTE: Be sure to line up the slots on the separation roller with the holders. 5. Push the separation roller holder back in place. 6. Lower the roller cover. 7. Close the swing out door. A-61169 July 2003 5-15
A-61169 July 2003
5-15
Separation roller and
tires
This section provides procedures for changing the separation roller and
tires.
Replacing the separation
roller
To replace the separation roller:
1. Open the swing out door.
2. Lift the roller cover.
3.
Pull the separation pad holder forward and remove the separation
roller.
To install the new separation roller:
4.
Pull the separation pad holder forward and put the new separation
roller in place.
NOTE:
Be sure to line up the slots on the separation roller with the
holders.
5.
Push the separation roller holder back in place.
6. Lower the roller cover.
7. Close the swing out door.