Kodak I840 User Guide - Page 57
Press the upper and lower housings together until they snap into
UPC - 041778263082
View all Kodak I840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
6. Install each new tire by gently stretching it over the core. IMPORTANT: Do not overstretch the tire; it may tear. 7. Replace the core assembly in the feed module. 8. Repeat Steps 4 through 7 for the other core assembly. 9. Align the tabs on the upper housing with the slots on the lower housing. 10. Press the upper and lower housings together until they snap into place. 11. Insert the feed module by aligning the pins and fitting it into position. Verify that it is securely in place. 12. Close the swing out door. 5-14 A-61169 July 2003
5-14
A-61169
July 2003
6. Install each new tire by gently stretching it over the core.
IMPORTANT:
Do not overstretch the tire; it may tear
.
7. Replace the core assembly in the feed module.
8. Repeat Steps 4 through 7 for the other core assembly.
9. Align the tabs on the upper housing with the slots on the lower
housing.
10. Press the upper and lower housings together until they snap into
place.
11. Insert the feed module by aligning the pins and fitting it into position.
Verify that it is securely in place.
12. Close the swing out door.