Kodak I840 User Guide - Page 53

Cleaning the imaging guides, lower imaging guide with a clean, soft

Get Kodak I840 - Scanner Firmware - PC PDF manuals and user guides
UPC - 041778263082
View all Kodak I840 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Cleaning the imaging guides Avoid getting fingerprints on the imaging guides during the cleaning procedure. 1. Open the bi-fold door. 2. Get the upper imaging guide that was set aside previously. Clean the upper imaging guide with a clean, soft, lint-free cloth slightly moistened with water. Lightly wipe both sides with a Staticide wipe. 3. Reinstall the upper imaging guide. Make sure the notched side is facing up and that the imaging guide is pushed in all the way and fully seated in its slot. 4. Get the lower imaging guide that was set aside previously. Clean the lower imaging guide with a clean, soft, lint-free cloth slightly moistened with water. Lightly wipe both sides with a Staticide wipe. 5. Reinstall the lower imaging guide. Make sure the notched side is facing down and that the imaging guide is pushed in all the way and fully seated in its slot. 6. Close the bi-fold door. 5-10 A-61169 July 2003

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
5-10
A-61169
July 2003
Cleaning the imaging
guides
Avoid getting fingerprints on the imaging guides during the cleaning
procedure.
1. Open the bi-fold door.
2.
Get the upper imaging guide that was set aside previously. Clean the
upper imaging guide with a clean, soft, lint-free cloth slightly moistened
with water. Lightly wipe both sides with a Staticide wipe.
3.
Reinstall the upper imaging guide. Make sure the notched side is
facing up and that the imaging guide is pushed in all the way and fully
seated in its slot.
4.
Get the lower imaging guide that was set aside previously. Clean the
lower imaging guide with a clean, soft, lint-free cloth slightly moistened
with water. Lightly wipe both sides with a Staticide wipe.
5.
Reinstall the lower imaging guide. Make sure the notched side is
facing down and that the imaging guide is pushed in all the way and
fully seated in its slot.
6. Close the bi-fold door.