Kodak I840 User Guide - Page 44
Cleaning the paper path, Cleaning the upper transport area
UPC - 041778263082
View all Kodak I840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5 Maintenance Cleaning the paper path This chapter provides cleaning and replacement procedures for your scanner. For best scanner performance clean the areas outlined in this chapter every 8-hour shift, unless otherwise noted. Additional maintenance supplies can be ordering by calling DI Supply or through your Kodak Reseller. For a list of available supplies, see the section entitled, "Ordering Supplies" at the end of this chapter. IMPORTANT: All cleaning supplies can be disposed of in your normal waste management system, unless otherwise noted. Use the green handles when accessing scanner components. The paper path should be cleaned with a Paper Path Cleaner fed several times through the transport. To clean the paper path: 1. Remove the wrapping from the Paper Path Cleaner. 2. Adjust the feeder guides to the widest position. 3. Run the scanner in count-only mode. See Chapter 3, Operator Control Panel Functions, for procedures. 4. Feed the cleaning sheet (adhesive side up) in the landscape orientation several times through the transport. 5. Feed the cleaning sheet (adhesive side down) in the landscape orientation several times through the transport. NOTE: When a cleaning sheet gets dirty, discard it and use a new one. A-61169 July 2003 5-1