Konica Minolta C300i bizhub C360i/C300i/C250i Security Operations User Manual - Page 27
Accessing the user mode
View all Konica Minolta C300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2.1 Accessing the administrator mode 2 2.1.2 Accessing the user mode You can log on to the user mode as an administrator. In the user mode, you can check or delete a job, which is disabled in administrator mode. Tips The authority relating to box settings is the same as that of administrator mode. 0 The administrator must first make user authentication settings before he or she can access user mode. For details of the user authentication, see page 2-20. 0 Do not leave the machine while you are in the user mode. If it is absolutely necessary to leave the machine, be sure first to log off from the user mode. 1 Tap the [User Name] box. 2 Enter "admin" in [User Name], and enter the password set for this machine in [Password]. 3 Tap [OK]. 4 Tap [Login]. % If a wrong administrator password is entered, a message that tells that the authentication has failed appears. Enter the correct administrator password. % If the [Enhanced Security Mode] is set to [ON], entry of a wrong password is counted as unauthorized access. If a wrong administrator password is entered a predetermined number of times (once to three times) or more set by the administrator, a message appears saying that the machine accepts no more administrator passwords because of unauthorized access for any subsequent entry of the administrator password. The machine is then set into an access lock state. To cancel the access lock state, turn off, and then turn on, the main power switch of the machine. If the main power switch is turned off and on, the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the main power switch is turned off, then on again, wait bizhub C360i/C300i/C250i/C036DNi/C030DNi/C025DNi 2-7