Konica Minolta C300i bizhub C360i/C300i/C250i Security Operations User Manual - Page 28
Select [Administrator User Mode] from the pull-down menu of [User Type].
View all Konica Minolta C300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2.1 Accessing the administrator mode 2 at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the main power switch off, then on again, the machine may not function properly. 5 Perform a desired operation. % To delete a job, tap [Job List] and select a target job, and then tap [Delete]. 6 Tap [Close] or [ID] to log off from the user mode. 0 Do not leave the machine while you are in the user mode. If it is absolutely necessary to leave the ma- chine, be sure first to log off from the user mode. 0 If you have logged on to the user mode using the Web Connection and if you close the web browser without clicking [Logout], the control panel remains locked for 190 sec. 0 Different initial screens appear after you have logged on to the administrator mode depending on the Customize setting. The descriptions herein given are concerned with the display screen set in [Meter Counter] of Maintenance. 1 Start the Web browser. 2 Enter the IP address of the machine in the address bar to start Web Connection. 3 Select [Administrator (User Mode)] from the pull-down menu of [User Type]. 4 Enter the administrator password in the [Password] box. % If [Administrator (User Mode)] is selected, you can log on to the user mode as an administrator. In the user mode, you can check or delete a job, which is disabled in administrator mode. Note, however, that the authority relating to box settings is the same as that of administrator mode. bizhub C360i/C300i/C250i/C036DNi/C030DNi/C025DNi 2-8