Konica Minolta C83hc High Chroma GBC PUNCH G2 User Manual - Page 9
Problem Solving, Specifications
![]() |
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. PROBLEM SOLVING Problem Probable Cause No power, won't punch Power cord not attached to back of machine or not properly plugged into the wall. Power On/Off Switch not activated. Punched holes not aligned with the edge of the paper Follow instructions on die set labels to properly configure the die for a specific sheet size. Sheet jamming repeatedly at die set area. Remove the die-set, inspect the die throat to see if there is any stuck paper chad. Insert Chip tray message on the Make sure the Chip tray is fully LCD interface. inserted. 7. SPECIFICATIONS PUNCH G2 EN Speed Up to 136 sheets per minute Punch Sheet Size and Edge LEF- Long Edge Fed SEF- Short Edge Fed Tab Stock US Sizes LTR LEF LTR SEF LTR SEF Double Punch Statement LEF Legal SEF Ledger SEF Ledger SEF Double Punch ISO sizes A4 LEF A4 SEF A4 SEF Double Punch A5 LEF A3 SEF A3 SEF Double Punch US Sizes LTR, with 3,4,5,8 and 10 tabs Statement, with 3 and 5 tabs ISO Sizes A4, with 5 and 10 tabs A5, with 3 and 5 tabs Paper Stock Clear Cover Plain: 75gsm - 300gsm (20# bond to 110# cover) Coated: 120gsm - 300gsm (32# bond to 110# cover) 7mil Bypass mode stock and Paper sizes and stocks same as sizes printer Punch Capacity Single Sheet Power Supply 115V, 60Hz, Single Phase 230V, 50Hz, Single Phase Electrical Amps and Frequency 115V; 3.8A; 60Hz (or) 230V; 1.9A; 50Hz Safety Certification Dimensions Weight Shipping Weight Manufactured cULus L: 775mm; W: 445mm; H: 1020mm L: 30.5"; W: 17.5"; H: 40.2" 95 kg 210 lbs 123 kg 272 lbs. Assembled in Taiwan 9
![](/manual_guide/products/konica-minolta-accuriopress-6120-gbc-punch-g2-user-manual-25f9744/9.png)