Konica Minolta Fujitsu fi-7180 Operation Guide - Page 131

Chapter 8 Troubleshooting Temporary Errors The following are lists of temporary errors which can be recovered by operators. ■Paper feeding errors Error codes beginning with the letter "J" are displayed. Error code Error messages J0:37 Paper Protection Remove and check the document, and then try again carefully. Resolution 1 Remove the jammed document. For details, refer to "8.1 Paper Jam" (page 128). 2 Check if the document is suitable for scanning by ADF. For details, refer to "2.3 Documents for Scanning (ADF)" (page 45). 3 Press the [Menu] button on the operator panel, select whether to enable or disable the document protection function, and then press the [Scan/Enter] button or perform a scan from the computer. Error code Error messages Resolution J0:51 Paper Protection Remove and check the document, and then try again carefully. 1 Remove the jammed document. For details, refer to "8.1 Paper Jam" (page 128). 2 Make sure that there is no document that is folded and that the documents conform to the paper specifications (e.g. thin paper). For details, refer to "2.3 Documents for Scanning (ADF)" (page 45). 3 Press the [Menu] button on the operator panel, select whether to enable or disable the document protection function, and then press the [Scan/Enter] button or perform a scan from the computer. J1:31 J1:5A J1:50 Paper jam Remove and check the document, and try again. Pick error Remove and check the document, and try again. 1 Remove the jammed document. For details, refer to "8.1 Paper Jam" (page 128). 2 Check if the document is suitable for scanning by ADF. For details, refer to "2.3 Documents for Scanning (ADF)" (page 45). 3 Clean the rollers. For details, refer to "Chapter 6 Daily Care" (page 108). TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 131