Konica Minolta Fujitsu fi-7180 Operation Guide - Page 149

Chapter 8 Troubleshooting Situation in which the document is not fed into the ADF occurs frequently. Do the documents meet the requirements described in "Precautions" in "Conditions" (page 45)? Yes Did you fan the documents before loading them in the ADF paper chute (feeder)? Yes Are the consumables (*1) installed correctly? Yes Are the consumables (*1) clean? Yes Are the consumables (*1) worn out? Use documents that meet the requirements. For details, refer to "2.3 Documents for Scanning (ADF)" (page 45). No Fan the documents before loading them. Or reduce the amount of documents. No Install the consumables (*1) correctly. For details, refer to "Chapter 7 Replacing the Consumables" (page 119). No Clean the consumables (*1). For details, refer to "Chapter 6 Daily Care" (page 108). No Check the consumable counters and replace them if necessary. For details, refer to "Chapter 7 Replacing the Consumables" (page 119). Yes No *1: "Consumables" refers to the brake roller and the pick roller. If the problem persists, check the items in "8.4 Before You Contact the Scanner Service Provider" (page 159) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 149