Konica Minolta MGI iFOIL S Printing Press iFOILs User Manual - Page 11
Before doing service work apply security rules when using the iFOIL S., iFOIL S Safety Instructions
View all Konica Minolta MGI iFOIL S Printing Press manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
iFOIL S 2. Security and Safety Rules 2.6 Before doing service work apply security rules when using the iFOIL S. 2.6.1 General using security rules For security purposes, always disconnect the main power plug before any maintenance or reparation on the equipment. 2.6.2 Moving parts For security purposes, when you Refer to this Logo, take of moving parts; disconnect the main power plug before any maintenance or reparation on the equipment. 2.7 iFOIL S Safety Instructions General operating rules Safety - Fire extinguisher Safety perimeter Recommendations Caution relating to products Dust and environment For safety reasons, always disconnect power connectors prior to performing any maintenance or repair operation. Any person authorized to intervene shall be called for any important setting or repair operations, especially for electrical repair purposes. Handling hot foil stamping requires the following rules to be complied with in order to prevent any risks to helth. Refer to MSDS - material safety data sheets (refer to 1 - appendix). As any machine using elements heating up to more than 70°C, the iFOIL S shall have a fire extinguisher nearby. For more safety, a 60 cm perimeter around the iFOIL S is recommended; as a rule, the more free the direct area around the machine, the less substantial the risks in terms of both pallet size and chemical products. It is prohibited to place chemical products inside the machine. It is highly recommended not to have flammable materials around the machine; 1 meter clearance all around the machine allows for safe working. For user convenience, it is recommended to have an air renewal system. As a matter of fact, the iFOIL S operates with Allogen lamps which release heat, and the ambient temperature may rise at the end of the day. Do not let the machine operate alone When operating, the iFOIL S uses heating elements -up to more than 70°C-even though sensors are present to prevent all risks, it is prohibited to leave the iFOIL S in unattended operation. Any product having started a polymerization phase cannot be used The room where the iFOIL S is located shall be as clean as possible as any dust deposited on sheets before varnish drying is "encapsulated" User Manual 11