Konica Minolta MGI iFOIL S Printing Press iFOILs User Manual - Page 13
Designated used
View all Konica Minolta MGI iFOIL S Printing Press manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
iFOIL S 3.Machine specification 3.2 Designated used Substrate size: Substrate type: Substrate thickness: Embossing thickness: Foil width: Foil area: Number of area per sheet: Sheet length: Foil specification: Preferred type of files: Foil processing temperature: Min: 21.0x29.7 cm / 8x11.8" Max: 36.4x102.0 cm / 14.33x40.15" Matte or glossy laminated surfaces With / without aqueous coating layered paper PVC a.o. coated paper Preferred surface is aqueous coated paper Min: 150 µm Max: 450 µm Min: 30 µm Max : 100 µm with the standard JETVARNISH 3DS. 200 µm with twins bar option. Min: 100 mm Max: 320 mm Min: 10 x 5 cm (10cm minimum width) Max: 32 x 102 cm 6 stamp areas on a sheet with 105 cm length if separation distance is minimum. Min: 210 mm Max: 1020 mm - Most of the foil design to foil on PVC or PP. - Foil core: 1 inch (ca. 76 mm) / optional 3 inches. - Extern diameter: Max. 30 cm (foil length around 2000 m depending from foil thickness) - Foil width: 320 mm - Max. 3 foil rolls synchronously (min. width 100mm) iFOIL S has been developed mainly to get embellishment of printed material using generally small areas such as text and logos. Foil quality on full flat surface area cannot be ensure as it will depend from type of paper and foil. Min : 90°C Max: 190°C Any use contrary to the designated use of the iFOIL S machine may involve danger for the machine as well as for staff and is forbidden. User Manual 13