Konica Minolta MGI iFOIL S Printing Press iFOILs User Manual - Page 48
iFOIL S component location, Machine error code, JETVARNISH 3DS User Manual
View all Konica Minolta MGI iFOIL S Printing Press manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
iFOIL S 6.How to operate the machine Approximately 1 minutes after, the automata finished its boot sequence. Hold ON button (refer to Erreur ! Source du renvoi introuvable. - iFOIL S component location) 3 seconds. GREEN The heating roller goes up and the beacon becomes green. If it stay red, press RESET button (refer to Erreur ! Source du renvoi introuvable. - iFOIL S component location). If it do not work, look the error message display on the 3DS HUB manager and refer to 7.1 - Machine error code to know what to do. Switch on the 3DS HUB. (Refer to. JETVARNISH 3DS User Manual) User Manual 48
iFOIL S
6.How to operate the machine
User Manual
48
Approximately 1 minutes after, the automata finished its boot sequence. Hold
ON button
(refer to
Erreur ! Source
du renvoi introuvable.
–
iFOIL S component location
) 3 seconds.
The heating roller goes up and the beacon becomes green. If it stay red, press
RESET
button
(refer to
Erreur !
Source du renvoi introuvable.
–
iFOIL S component location
). If it do not work, look the error message display on
the 3DS HUB manager and refer to
7.1
–
Machine error code
to know what to do.
Switch on the 3DS HUB. (Refer to.
JETVARNISH 3DS User Manual
)
GREEN