Konica Minolta MGI iFOIL S Printing Press iFOILs User Manual - Page 44

Normal value is 4 bars.

Get Konica Minolta MGI iFOIL S Printing Press PDF manuals and user guides View all Konica Minolta MGI iFOIL S Printing Press manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

iFOIL S 5.3.3 Heating roller pressure adjustment 5.Machine consumables and cleaning Check on the both manometer on top of the heating roller if the pressure is correct. Min: 2.5 bars Max: 6 Tips: Recommended value: 4 bars. If the pressure value was not correct, adjust it. To do so pull up the manometer handle and turn it. If there is a little difference of angle, you can adjust it by setting a different pressure between the both sides. Tips: Put a little bit less pressure on backside could be helpful. CAUTION: if you have a difference of pressure superior at 0.5 bars between the both sides to get a good quality, you need to call a qualified technician. 5.3.4 Tension roller pressure adjustment Check on the both manometer on top of each tension roller (tension-in and tension-out). Normal value is 4 bars. [2] [1] To adjust the pressure, unscrew the counter nut [1] and screw or unscrew the handle [2]. User Manual 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
iFOIL S
5.Machine consumables and
cleaning
User Manual
44
5.3.3
Heating roller pressure adjustment
Check on the both manometer on top of the heating roller if the pressure is correct.
Min: 2.5 bars
Max: 6
Tips: Recommended value: 4 bars.
If the pressure value was not correct, adjust it. To do so pull up the manometer handle and turn it.
If there is a little difference of angle, you can adjust it by setting a different pressure between the both sides.
Tips: Put a little bit less pressure on backside could be helpful.
CAUTION: if you have a difference of pressure superior at 0.5 bars between the both sides to get
a good quality, you need to call a qualified technician.
5.3.4
Tension roller pressure adjustment
Check on the both manometer on top of each tension roller (tension-in and tension-out).
Normal value is 4 bars.
To adjust the pressure, unscrew the counter nut
[1]
and screw or unscrew the handle
[2]
.
[2]
[1]