Konica Minolta MGI iFOIL S Printing Press iFOILs User Manual - Page 38
buffer roller, foil running diagram 3 inches, tension-in roller
View all Konica Minolta MGI iFOIL S Printing Press manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
iFOIL S 5.Machine consumables and cleaning Second place your foil roll [3] on the 3 inches unwinding axle [1], then put the operator side foil guide [4] on the 3 inch unwinding axle [1]. Fix it with the orange clamping lever. Orange clamping lever Foil guide Lead the foil through the buffer roller (refer to Erreur ! Source du renvoi introuvable. - iFOIL S component location). Then lead the foil through the different roller according to foil running diagram 3 inches until to reach the tension-in roller (refer to Erreur ! Source du renvoi introuvable. - iFOIL S component location). When you reach the tension-in roller, open it with the switch (refer to 4.4.1 - iFOIL S panel presentation). User Manual 38
iFOIL S
5.Machine consumables and
cleaning
User Manual
38
Second place your foil roll
[3]
on the 3 inches unwinding axle
[1]
, then put the operator side foil guide
[4]
on the 3
inch unwinding axle
[1]
. Fix it with the orange clamping lever.
Lead the foil through the
buffer roller
(refer to
Erreur ! Source du renvoi introuvable.
–
iFOIL S component
location
).
Then lead the foil through the different roller according to
foil running diagram 3 inches
until to reach the
tension-in roller
(refer to
Erreur ! Source du renvoi introuvable.
–
iFOIL S component location
). When you reach
the
tension-in roller
, open it with the switch (refer to
4.4.1
–
iFOIL S panel presentation
).
Orange clamping lever
Foil guide