Konica Minolta MGI iFOIL S Printing Press iFOILs User Manual - Page 39
tension-in roller, foil running diagram 3, inches, heating roller, deviation rollers, foil running
View all Konica Minolta MGI iFOIL S Printing Press manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
iFOIL S 5.Machine consumables and cleaning Pass the foil through the tension-in roller and continue to lead the foil according to foil running diagram 3 inches until to reach the heating roller (refer to Erreur ! Source du renvoi introuvable. - iFOIL S component location). Pass the foil through the heating roller and then though the deviation rollers (refer to Erreur ! Source du renvoi introuvable. - iFOIL S component location). Tips: If necessary lift up the separation rollers to make easier foil passage (refer to 5.3.1 - separating roller height setting). CAUTION: Do not forget to put back in correct position the separation roller. This setting is an important setting on the iFOIL S. The height of the separation rollers have a great influence on quality. Tips: In By-pass mode and By-pass normal mode it is recommended to lift up the separation roller to avoid marking your printing sheets. Continue to lead the foil through the different rollers according to foil running diagram 3 inches until to reach the tension-out roller (refer to Erreur ! Source du renvoi introuvable. - iFOIL S component location). When you reach the tension-out roller, open it with the switch (refer to 4.4.1 - iFOIL S panel presentation). User Manual 39