Kyocera KM-5230 4230-5230 Instruction Handbook - Page 196

Trouble Copies come out too dark. Checks Is the copier in the auto exposure mode? Action Adjust exposure settings in the "Auto exposure adjustment". Page 141 Is the copier in the manual exposure mode? Adjust the exposure to the correct degree using the manual exposure adjustment keys. 41 To adjust the overall exposure, perform "Manual exposure adjustment". 142 Drawer cannot be closed. Was more than one drawer pulled open at one time? Pull open the drawer that is closed, and close it together with the drawer that could not be closed. ___ Copies are dirty. Is the platen, the slit glass or the original cover dirty? Clean the platen, the slit glass and/or the original cover. 196 Black lines appear on the copy. Is the slit glass dirty? Clean the slit glass. 196 Copy image is askew. Are the originals set correctly? When originals are set in the DF, align them with the original insertion guide securely. When originals are set on the platen, align their edges with the correct original size indicator lines for their size. 38, 40 Paper keeps being misfed. Is the paper set correctly in the drawers? Set paper correctly. 31 Copied paper may curl badly and it may cause paper misfeeds depending on the type of paper and keeping state. 31 Remove the paper from drawer and turn it over and reset. Is paper curled, folded over or wrinkled? Replace the paper with new paper. 31 Is there any misfed paper or loose scraps of paper remaining inside the copier? Carry out the appropriate procedure to remove the paper. 174 191