Kyocera TASKalfa 620 TASKalfa 620/820 Print Driver Users Guide Rev 8.1 - Page 21
Setting the Administrator Password, Clearing the Administrator Password, SNMP Settings, SNMPv3
View all Kyocera TASKalfa 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
KX Driver Device Settings selected, this setting will prompt you to enter a password and confirm the password. This password protection blocks access to Job accounting, Operation panel message, Show Quick Print tab, Lock Security Settings, and SNMP Settings. You must also set the administrator password in the printing system's Command Center. Setting the Administrator Password 1 In Device Settings > Administrator Settings, select Password protect administrator settings. 2 In the Password dialog box, enter a password, using at least 4 and no more than 16 characters. Reenter the password in Confirm password and click OK. Clearing the Administrator Password 1 In the Device Settings tab, click Administrator. 2 In the Enter Password dialog box, type the password and click OK. 3 In the Administrator Settings dialog box, clear the Password protect administrator settings check box. 4 Click OK. SNMP Settings Simple Network Management Protocol (SNMP) is a set of rules that govern the management of network devices, such as printing systems. SNMP settings determine the level of security when using the Auto Configure feature, and prevent unauthorized printing to the SNMPv3 printing system. SNMP settings must be set in the printer driver and in the printing system's Command Center. The following SNMP options are available: SNMPv1/v2c This option ensures successful Auto Configure communication using Read community name and Write community name. SNMPv3 This option ensures secure Auto Configure communication using a user name and password. Authentication and privacy options are available by selecting Settings. Apply to other models This option displays a list of installed printing systems to apply the selected SNMP settings. SNMPv3 Options You can select SNMPv3 options for secure communication with the printing system. SNMPv3 is enabled when an optional IB-23 network card is installed. These settings must match the IB-23 settings. IB-23 has settings for both an authentication password and an encryption password, but they must both match the driver password. Authentication 2-7