Lantronix PremierWave XC PremierWave XC - Command Reference - Page 110
host 20 config-host:20 level commands, host 21 config-host:21 level commands
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
host name no name no remote address no ssh username protocol ssh protocol telnet remote address remote port show show history ssh username write host 20 (config-host:20) level commands clrscrn default protocol default remote port exit host name no name no remote address no ssh username protocol ssh protocol telnet remote address remote port show show history ssh username write host 21 (config-host:21) level commands clrscrn default protocol 5: Commands and Levels Change to config host level Sets the name of the host. = name of the host. Clears the name of the host. Clears the remote address of the host. Clears the SSH username associated with the host. Sets the protocol to SSH. Sets the protocol to Telnet. Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. Sets the remote port used to connect to the host. = port to be used. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the username for logging into the host via SSH. = username. Stores the current configuration in permanent memory. Clears the screen. Restores the default value of the protocol (Telnet). Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. Exits to the configuration level. Change to config host level Sets the name of the host. = name of the host. Clears the name of the host. Clears the remote address of the host. Clears the SSH username associated with the host. Sets the protocol to SSH. Sets the protocol to Telnet. Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. Sets the remote port used to connect to the host. = port to be used. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the username for logging into the host via SSH. = username. Stores the current configuration in permanent memory. Clears the screen. Restores the default value of the protocol (Telnet). PremierWave XC Command Reference 110