Lantronix PremierWave XC PremierWave XC - Command Reference - Page 156
Disables the SSH Server.
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
show show history syslocation write ssh (ssh) level commands client clrscrn exit server show history write ssh (config-cli-ssh) level commands clrscrn default max sessions default port exit max sessions port show show history show statistics state disable state enable write ssl (ssl) level commands clrscrn credentials exit show history trusted authorities write syslog (config-syslog) level commands clrscrn default remote port default severity log level exit host no host 5: Commands and Levels = SNMP Server host name or IP Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Set the device's location when send the SNMP TRAP. = syslocation Stores the current configuration in permanent memory. Enters the SSH Client configuration level. Clears the screen. Exits to the enable level. Enters the SSH Server configuration level. Displays the last 20 commands entered during the current CLI session. Stores the current configuration in permanent memory. Clears the screen. Restores the default maximum allowed concurrent incoming SSH sessions. Restores the default local port to the SSH server. Exits to the CLI level. Sets the maximum allowed concurrent incoming SSH sessions. = number of sessions. Sets the local port that the SSH server uses. = local port number. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays the SSH server statistics. Disables the SSH Server. Enables the SSH Server. Stores the current configuration in permanent memory. Clears the screen. Enters the SSL credentials configuration level. Exits to the enable level. Displays the last 20 commands entered during the current CLI session. Enters the SSL configuration level. Stores the current configuration in permanent memory. Clears the screen. Restores the default syslog remote port. No logging. Returns to the config level. Sets the address of the syslog recipient. = IP address or name of the host. Removes the address of the syslog recipient. PremierWave XC Command Reference 156