Lantronix PremierWave XC PremierWave XC - Command Reference - Page 147
Sends Modem Response Codes out on the Serial Line., Does not send Modem Response Codes.
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
5: Commands and Levels send snmp show show history write modem (tunnel-modem:2) level commands clrscrn connect string default incoming connection default response type display remote ip disable display remote ip enable echo commands disable echo commands enable echo pluses disable echo pluses enable error unknown commands disable error unknown commands enable exit incoming connection automatic incoming connection disabled incoming connection manual no connect string reassert response type numeric response type text show show history show status verbose response disable verbose response enable write modem (tunnel-modem:1) level commands clrscrn connect string default incoming connection default response type display remote ip disable display remote ip enable echo commands disable echo commands enable Changes to snmp menu for io configuration Displays system information. Displays the last 20 commands entered during the current CLI session. Stores the current configuration in permanent memory. Clears the screen. Sets the CONNECT string used in modem emulation. = connect string. Default disables incoming network connections. Default uses text type responses. The incoming RING has nothing following it. The incoming RING is followed by the IP address of the caller. Does not echo modem commands. Echoes modem commands. Does not echo the +++ characters when entering modem command mode. Echoes the +++ characters when entering modem command mode. Returns OK on unknown AT commands. Returns an error upon unknown AT commands. Returns to the tunnel level. Automatically answer incoming network connections. Disable incoming network connections. Wait for an ATA command before answering an incoming network connection. Removes optional CONNECT string information for modem emulation. Asserts tunnel modem status with current configured values. Uses numeric type responses. Uses text type responses. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays tunnel modem status. Does not send Modem Response Codes. Sends Modem Response Codes out on the Serial Line. Stores the current configuration in permanent memory. Clears the screen. Sets the CONNECT string used in modem emulation. = connect string. Default disables incoming network connections. Default uses text type responses. The incoming RING has nothing following it. The incoming RING is followed by the IP address of the caller. Does not echo modem commands. Echoes modem commands. PremierWave XC Command Reference 147