Lantronix PremierWave XC PremierWave XC - Command Reference - Page 140
Sets the Maximum Transmission Unit MTU size., Clears the DHCP client ID.
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
link mtu no default gateway no dhcp client id no domain no hostname no ip address no primary dns no secondary dns primary dns secondary dns show show history show status write if 2 (config-if:wwan0) level commands bootp disable bootp enable clrscrn default gateway default mtu dhcp client id dhcp disable dhcp enable domain exit hostname if ip address link mtu no default gateway no dhcp client id no domain no hostname no ip address no primary dns no secondary dns primary dns secondary dns show PremierWave XC Command Reference 5: Commands and Levels Enter link configuration level Sets the Maximum Transmission Unit (MTU) size. Clears the default gateway. Clears the DHCP client ID. Clears the domain name. Clears the host name. Clears the IP address. Clears the name of the primary DNS server. Clears the name of the secondary DNS server. Sets the IP address of the primary DNS server. Sets the IP address of the secondary DNS server. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Show interface status Stores the current configuration in permanent memory. Disables BOOTP. Enables BOOTP. Clears the screen. Sets the configurable gateway IP address to the default value. Restores the default Maximum Transmission Unit (MTU) size. Sets the DHCP client id. Disables DHCP. Enables DHCP. Sets the domain name. = name of the domain. Exits to the config level. Sets the host name. = name of the host. Changes to the interface configuration level. Sets the IP address and network mask. Formats accepted: 192.168.1.1 (default mask) 192.168.1.1/24 (CIDR) "192.168.1.1 255.255.255.0" (explicit mask) Enter link configuration level Sets the Maximum Transmission Unit (MTU) size. Clears the default gateway. Clears the DHCP client ID. Clears the domain name. Clears the host name. Clears the IP address. Clears the name of the primary DNS server. Clears the name of the secondary DNS server. Sets the IP address of the primary DNS server. Sets the IP address of the secondary DNS server. Displays the current configuration. 140