Lantronix PremierWave XC PremierWave XC - Command Reference - Page 49
Table 5-1, Commands and Levels, packing tunnel-packing:2
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
• host 14 (tunnel-connect-host:2:14) • host 15 (tunnel-connect-host:2:15) • host 16 (tunnel-connect-host:2:16) disconnect (tunnel-disconnect:2) modem (tunnel-modem:2) packing (tunnel-packing:2) serial (tunnel-serial:2) o xml (xml) 5: Commands and Levels Table 5-1 Commands and Levels accept (tunnel-accept:2) level commands accept mode always accept mode any character accept mode disable accept mode modem control asserted accept mode modem emulation accept mode start character aes decrypt key aes decrypt key text aes encrypt key aes encrypt key text block network disable block network enable Enables the tunneling server to always accept tunneling connections. Enables the tunneling server to accept tunneling connections only when a character is received through the corresponding line (serial port). Disables accept mode tunneling. Enables the tunneling server to accept tunneling connections when the modem control pin is asserted. Enables modem emulation for accept mode tunneling. Enables accept mode tunneling when the configured start character is received on the line. Sets the accept tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. Sets the accept tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. Sets the accept tunnel AES encrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. Sets the accept tunnel AES encrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. Forwards (tunnels) network data in accept mode tunneling. Discards all data coming in from the accept mode tunnel before forwarding it to the serial interface (generally used for debugging). PremierWave XC Command Reference 49