Lantronix PremierWave XC PremierWave XC - Command Reference - Page 153
Clear the RSS Feed data, Display the RSS Feed status
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
write root level commands clear events clear faults clrscrn enable exit ping ping ping show show history trace route trace route rss (config-rss) level commands clear rss clrscrn default max entries exit feed disable feed enable max entries persist disable persist enable show show history show status write serial (tunnel-serial:2) level commands clrscrn default dtr dtr asserted while connected dtr continuously asserted dtr truport dtr unasserted exit show show history write serial (tunnel-serial:1) level commands clrscrn default dtr dtr asserted while connected PremierWave XC Command Reference 5: Commands and Levels Stores the current configuration in permanent memory. clear system current all events. clear system current all faults. Clears the screen. Enters the enable level. Exit from the system Ping destination continuously with 5 second timeout Ping destination n times with 5 second timeout Ping destination n times with x timeout (in seconds) Show system information Displays the last 20 commands entered during the current CLI session. Trace route to destination Trace route to destination using TCP, ICMP, or UDP Clear the RSS Feed data Clears the screen. Restores the default number of RSS feed entries. Exits to the configuration level. Disables RSS feed. Enables RSS feed. Sets the maximum number of RSS feed entries. Disables RSS feed data persistence. Enables RSS feed data persistence. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Display the RSS Feed status Stores the current configuration in permanent memory. Clears the screen. Restores default DTR control, asserted while connected. Asserts DTR whenever a connect or accept mode tunnel connection is active. Asserts DTR regardless of any connections. Asserts DTR to match remote DSR when connected via Telnet. Does not assert DTR. Returns to the tunnel level. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Stores the current configuration in permanent memory. Clears the screen. Restores default DTR control, asserted while connected. Asserts DTR whenever a connect or accept mode tunnel con- 153