Lantronix PremierWave XC PremierWave XC - Command Reference - Page 157
Disables the Telnet Server.
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
5: Commands and Levels remote port severity log level alert severity log level critical severity log level debug severity log level emergency severity log level error severity log level information severity log level none severity log level notice severity log level warning show show history show statistics state disable state enable write telnet (config-cli-telnet) level commands authentication disable authentication enable clrscrn default max sessions default port exit max sessions port show show history show statistics state disable state enable write terminal 1 (config-terminal:1) level commands break duration clrscrn default break duration default terminal type echo disable echo enable Sets the syslog remote port. = number of the remote port used when making a syslog connection. Log only Alert and more severe events. Log only Critical and more severe events. Log all events. Log only Emergency events. Log only Error and more severe events. Log only Information and more severe events. No logging. Log only Notice and more severe events. Log only Warning and more severe events. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays the syslog statistics. Disables syslog logging. Enables syslog logging. Stores the current configuration in permanent memory. No password required for Telnet users. Challenges the Telnet user with a password. Clears the screen. Restores the default maximum allowed concurrent incoming Telnet sessions. Restores the default local port to the Telnet server. Exits to the CLI level. Sets the maximum allowed concurrent incoming Telnet sessions. = number of sessions. Sets the local port that the Telnet server uses. = local port number. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays the Telnet statistics. Disables the Telnet Server. Enables the Telnet Server. Stores the current configuration in permanent memory. Sets how long a break should last when it is being sent to the line. = number of milliseconds. Clears the screen. Restores the break duration to the default value (500 ms). Sets the default terminal type, "UNKNOWN". Disables echoing of characters received on the line back to the line. Enables echoing of characters received on the line back to the PremierWave XC Command Reference 157