Lantronix PremierWave XC PremierWave XC - Command Reference - Page 58
Sets a specific port for use as the local port., local port
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
connect mode start character default connect mode default host mode default local port default reconnect time default start character email connect email disconnect exit flush serial disable flush serial enable flush start character disable flush start character enable host host mode sequential host mode simultaneous kill connection local port no email connect no email disconnect promote host reconnect time show show history show status start character PremierWave XC Command Reference 5: Commands and Levels Enables connect mode tunneling when the configured start character is received on the line. Restores the default connect mode as "disable". Connects to the first host in the list that accepts the connection. Uses a random port number as the local port for establishing tunneling connections to other devices. Restores the default reconnect time value for connect mode tunneling. Defaults the connect mode start character. Sets an email profile to use to send an email alert upon establishing a connect mode tunnel. = the number of the email profile to use. Sets an email profile to use to send an email alert upon closing a connect mode tunnel. = the number of the email profile to use. Returns to the tunnel level. Characters already in the serial data buffer are retained upon establishing a connect mode tunneling connection. Flushes the serial data buffer upon establishing a connect mode tunneling connection. Enables forwarding of the connect start character into the network. Disables forwarding of the connect start character into the network. Enters the next lower level. Specify the instance for the next lower level. Connects to the first host in the list that accepts the connection. Selects simultaneous connections to all hosts on the host list. Disconnects the active connect mode tunneling connection or connections. Sets a specific port for use as the local port. = the number of the port to use. Discontinues sending email alerts upon establishing a connect mode tunnel. Discontinues sending email alerts upon closing a connect mode tunnel. Promotes the identified host, exchanging it place with the host above it, to adjust the order of the defined hosts. Sets the reconnect time value for tunneling connections established by the device in milliseconds. = timeout in milliseconds. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays tunnel connect status. Sets the connect mode start character. 58