Lantronix PremierWave XC PremierWave XC - Command Reference - Page 146
Enter SMS Inbound configuration menu., link config-ethernet:eth0 level commands
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
5: Commands and Levels clrscrn Clears the screen. exit Exit back to interface configuration level gsm gprs band Changes to service menu for configuration and status pin Changes to PIN menu for configuration and status. roam Enter roam configuration menu. show history Displays the last 20 commands entered during the current CLI session. show status Show interface Wwan0 status sms inbound Enter SMS Inbound configuration menu. sms outbound Changes encoding format of SMS. sms statistics Show sms statistics write Stores the current configuration in permanent memory. link (config-ethernet:eth0) level commands clrscrn Clears the screen. default duplex Restores the default duplex setting, which is auto. default speed Restores the default speed setting, which is auto-negotiate. duplex auto Sets duplex mode to auto. duplex full Sets duplex mode to full. duplex half Sets duplex mode to half. exit Exit back to interface configuration level show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. speed 10 Sets the speed of the Ethernet link to 10 Mbps. speed 100 Sets the speed of the Ethernet link to 100 Mbps. speed auto Sets the speed of the Ethernet link to auto-negotiate. write Stores the current configuration in permanent memory. log (config-diagnostics-log) level commands clrscrn Clears the screen. default max length Restores the factory default maximum Log file size. default output Restores the default log output, which is disable. exit Exits to the next higher level. max length Sets the maximum size in Kbytes for the Log file. output disable Disables log output. output filesystem Enables log to filesystem. output line Enables log to serial line. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. main power fail (config-events-main_power_fail) level commands clear events clear system current all events. clear faults clear system current all faults. clrscrn Clears the screen. exit Exits to the event configuration level. relay output Changes to power fail relay output menu for configuration. send sms Change to SMS for io configuration PremierWave XC Command Reference 146