Lantronix PremierWave XC PremierWave XC - Command Reference - Page 128
host 6 config-host:6 level commands, default remote port
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
protocol ssh protocol ssl protocol tcp protocol tcp aes protocol telnet protocol udp protocol udp aes show show history show statistics ssh username tcp keep alive validate certificate disable validate certificate enable write host 6 (config-host:6) level commands clrscrn default protocol default remote port exit host name no name no remote address no ssh username protocol ssh protocol telnet remote address remote port show show history ssh username write 5: Commands and Levels Uses SSH protocol for connect mode tunneling. Uses SSL protocol for connect mode tunneling. Uses TCP protocol for connect mode tunneling. Uses TCP protocol with AES encryption for connect mode tunneling. Uses Telnet protocol (with IAC) for connect mode tunneling. Uses UDP protocol for connect mode tunneling. Uses UDP protocol with AES encryption for connect mode tunneling. Shows the current configuration. Displays the last 20 commands entered during the current CLI session. show connection statistics Sets the SSH user name for use when establishing tunneling connections with other devices. = SSH user name. Enables TCP keep alive for connect mode tunneling and sets the timer. = timer value, in milliseconds. Skips verification of the server certificate when connecting. Requires verification of the server certificate when connecting. Stores the current configuration in permanent memory. Clears the screen. Restores the default value of the protocol (Telnet). Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. Exits to the configuration level. Change to config host level Sets the name of the host. = name of the host. Clears the name of the host. Clears the remote address of the host. Clears the SSH username associated with the host. Sets the protocol to SSH. Sets the protocol to Telnet. Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. Sets the remote port used to connect to the host. = port to be used. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the username for logging into the host via SSH. = username. Stores the current configuration in permanent memory. PremierWave XC Command Reference 128